Onboard Programming: must be before 2011 and have 2 fobs that start engine <strong>Programming Notes:</strong> Gather all remote transmitters for this vehicle. You will need at least 2 working remote head or transponder keys in order to perform this procedure yourself. <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Insert the first working FOBIK remote key into the Ignition.</li> <li>Turn Ignition to the ON position for at least 3 to 15 seconds, and then turn Ignition to the OFF position and remove the key.</li> <li>Within 15 seconds, insert second working FOBIK remote key into Ignition, and turn Ignition to the ON position.</li> <li>After 10 seconds, a chime will sound and the Immobilizer Warning Lamp will flash showing entry into Programming Mode.</li> <li>Turn Ignition OFF, and remove the second working FOBIK remote key.</li> <li>Within 60 seconds insert the new FOBIK remote key into Ignition, and turn Ignition to the ON position.</li> <li>After 10 seconds a chime will sound and the Immobilizer Warning Lamp will flash showing successful programming of that remote.</li> <li>Turn Ignition to the OFF position and remove the key.</li> <li>Repeat Steps 6-8 for any additional FOBIK remote keys to be programmed to your Vehicle.</li> <li>Test all remotes. Programming is now complete. The remote and key are now both programmed.</li> </ol>