&nbsp; Onboard Programming: must be before 2011 and have 2 fobs that start engine <strong>Programming Instructions:</strong> All vehicles after 2008 will have to go to dealer or locksmith for programming. Gather all remote transmitters for this vehicle. THIS PROCEDURE FOR FOBIX KEY YOU MUST HAVE TWO WORKING FOBIX REMOTES TO USE THIS PROCEDURE. <strong>Step-by-Step Programming Instructions: </strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Insert first programmed key into ignition switch.</li> <li>Switch ignition ON for at least 3 seconds but no longer than 15 seconds.</li> <li>Turn ignition OFF and remove key.</li> <li>Within 15 seconds insert second programmed key into ignition switch and turn ignition ON.</li> <li>After 10 seconds an audible tone will be heard and the immobilizer-warning lamp will flash.</li> <li>Turn ignition OFF and remove second programmed key.</li> <li>Within 60 seconds insert non-programmed key into ignition switch and turn ignition ON.</li> <li>After 10 seconds an audible tone will be heard and the immobilizer-warning lamp will illuminate for 3 seconds.</li> <li>Switch ignition OFF.</li> <li>Remove key.</li> <li>Check operation of programmed key transmitter.</li> <li>Repeat procedure for additional key transmitters if required (up to 8 key transmitters can be programmed).</li> </ol> &nbsp;