Do NOT purchase this item unless you have the program software and Arial antenna to PRE-CODE this FOB. ALSO, check with Tech. If first digit of VIN is a 3. And there are NO KEYS ! And alarm is set (Going off). BCM is "locked" and will need to be replaced. before keys can be programmed. Even though this key looks the same as a Promaster key, they are different electronically. If you need a Promaster key, please see RAM Promaster.
FIAT001
4 In Stock
Price (3.5% OFF)
$125.00
$120.63
Buy 10 or more
Save an additional 5%
$114.59
per unit
SKU / Part Number
FIAT001
Stock Level
4 units
Programming Instructions
Follow these steps to program this key to the vehicle.
<em><strong>Must have current Fiat 500 software for T-Code / SmartPro or Autel 608, as well as the programming aerial. If not you must go to dealership for the key.</strong></em>
<strong>IMPORTANT PROGRAMMING NOTE:</strong> When programming this class of FIAT vehicles. ALL available keys need to be programmed ANY TIME you program NEW keys.
ANY old keys NOT re-added when NEW keys are programmed <span style="text-decoration: underline"><strong>CAN NOT BE ADDED LATER !</strong></span>
The vehicle maintains a LIST of OLD key values and BLOCKs them from being added later.
Also remember PINs aquired through a tool must use that tool to program. PINs aquired through NASTF will only work through the MicroPod / WiTech.
Build Instructions
Internal manufacturing and assembly notes.
Can use KG - K91910. Have not verified compatibility. KG has the black plastic button like Promaster style FOB.
Used boards Require PCF7946 be replaced.
Fiat 500 uses Delphi Boards (ProMaster uses Magneti Marelli boards)
The boards are interchangeable in the cases, but operate differently than the buttons indicate if used on the wrong car.
Re-shell and ready. NOTE: the aluminum Logo button covers are hard to come by. try using Promaster style cases without a logo.
replacement blades that fit are difficult to come by.
OE shells can use KGO blades (from their shell K81458) and secure with .310 x .083 SS roll pin
I found the .310 x .083 SS roll pins to be too large and used 0.066 stainless.
