Onboard Programming: Yes, with 2 original working keys IMPORTANT: Remote must be programmed separately using standard onboard procedure. <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Close all vehicle doors, and then open driver’s door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.</li> </ol> <ol> <li>Turn ignition from OFF to ON 8 times within 10 seconds, with the 8th time ending in ON. Door locks will cycle to confirm programming mode.</li> <li>Within 20 seconds press any button on the first keyless remote. Door locks will cycle to confirm programming.</li> <li>Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming.</li> <li>Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.</li> </ol>