<strong>Programming Notes:</strong> Gather all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. All existing and new remotes that you want to use on the vehicle must be programmed at this time. <strong>Process #1 (Vehicles with Driver Information Center Button – Located to the Right of Steering Wheel)</strong> <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Insert key and turn the ignition to ON position without starting the car.</li> <li>Press vehicle information button until “PRESS TO RELEARN REMOTE KEY” is shown.</li> <li>Press the Set/Reset Button (Button will have a checkmark) until “REMOTE KEY LEARNING ACTIVE” is shown. Vehicle is now in Programming Mode.</li> <li>Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An audio signal will sound indicating successful programming.</li> <li>Repeat Step 4 to program additional remotes. You may program up to 8 remotes for this vehicle. You must program ALL remotes including existing remotes.</li> <li>To exit Programming Mode, turn ignition OFF &amp; remove key.</li> <li>Test all remotes. Programming is now complete.</li> </ol> <strong>Process #2 (Vehicles without Driver Information Center Button)</strong> <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Insert key and turn the ignition to ON position without starting the car.</li> <li>Press the Trip Odometer Reset Button until “RELEARN REMOTE KEY” is shown.</li> <li>Press and hold the Trip Odometer Reset Button for approximately 3 seconds until “REMOTE KEY LEARNING ACTIVE” is shown. Vehicle is now in Programming Mode.</li> <li>Press and hold the LOCK and UNLOCK buttons at the same time on the first remote for approximately 15 seconds. An audio signal will sound indicating successful programming.</li> <li>Repeat Step 4 to program additional remotes. You may program up to 8 remotes for this vehicle. You must program ALL remotes including existing remotes.</li> <li>To exit Programming Mode, turn ignition OFF &amp; remove key.</li> <li>Test all remotes. Programming is now complete.</li> </ol>