<strong>Programming Instructions: for Chevy / Saturn:</strong> <strong> 2007-2013 Silverado's </strong> <strong>2007-2017 Traverse</strong> 2011-2015 Captiva Sport 2008-2010 Vue 2007-2017 Enclave 2007-2008 Suzuki XL7 &nbsp; <strong><u>Use this Procedure for Vehicles with Driver Information Center</u></strong> 1. Insert Key and turn to ON position. 2. Press the vehicle information button until <strong><u>PRESS TO RELEARN REMOTE KEY</u></strong> displays 3. Press the set/reset button until <strong><u>REMOTE KEY LEARNING ACTIVE</u></strong> displays 4. Press and hold <strong>BOTH</strong> the lock and unlock buttons on the keyless remote <span style="text-decoration: underline">at the same time</span> for approximately 15 seconds. A chime will sound indicating that the remote is programmed. 5. To program additional remotes at this time repeat step 4. 6. Turn key off and remove,  then test remotes. &nbsp; <strong><u>Use this Procedure for Vehicles without Drivers Information Center</u></strong> 1.      Insert key into ignition and turn to the on position. 2.      Press the trip odometer reset stem until <strong><u>RELEARN REMOTE KEY</u></strong> displays. 3.      Press and hold the trip odometer reset stem for three seconds. The message <strong><u>REMOTE KEY LEARNING ACTIVE</u></strong> will display 4.      Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed 5.      To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed. 6.      Turn key off and remove, test remotes.