GM037
12 In Stock
Price (3.5% OFF)
$58.50
$56.45
Buy 10 or more
Save an additional 5%
$53.63
per unit
SKU / Part Number
GM037
Stock Level
12 units
Programming Instructions
Follow these steps to program this key to the vehicle.
<strong>Programming Instructions:</strong>
<strong>Be sure to review all programming steps before proceeding</strong>
<strong><u>Use this procedure for vehicles with Driver information center.</u></strong>
1. Insert key and turn to the <strong><u>ON</u></strong> position.
2. Press the vehicle information button until (<strong>press To Relearn Remote Key</strong>) is displayed
3. Press the Set/Reset Button until (Remote Key Learning Active) is displayed
4. <strong><u>Press</u></strong><u> and <strong>Hold</strong></u> the <strong><u>LOCK AND UNLOCK</u> </strong>buttons on the First Remote for <u>approximately 15 seconds.</u> A chime will be heard indicating that the remote is programmed.
5. To Program additional remotes repeat step 4.
6. To exit programming mode turn the key off and remove key.
Use this procedure for vehicles without drivers information center.
1. Insert key into ignition and turn to the on position.
2. Press the trip/odometer rest stem for 3seconds. (Remote Key Learning Active) will be displayed.
3. <strong><u>Press</u></strong> <u>and <strong>Hold</strong></u> the <strong><u>LOCK AND UNLOCK</u></strong> buttons on the First Remote for <u>approximately 15 seconds.</u> A chime will be heard indicating that the remote is programmed.
4. To Program additional remotes repeat step 4.
5. To exit programming mode turn the key off and remove.
Build Instructions
Internal manufacturing and assembly notes.
Use GM.RM.S.002 shells. Mind the silicate contact pads that come with it. They have four nubs but only two will fit in the board. You need to cut the two middle nubs off at the base to fit on the PCBA.
