<strong>Be sure to review all programming steps before proceeding</strong> <strong>Programming Instructions:</strong> <strong><u>Use this procedure for vehicles with Driver information center.</u></strong> 1.  Insert key and turn to the <strong><u>ON</u></strong> position. 2.  Press the vehicle information button until (<strong>press To Relearn Remote Key</strong>) is displayed 3.  Press the Set/Reset Button until (Remote Key Learning Active) is displayed 4.  <strong><u>Press</u></strong><u> and <strong>Hold</strong></u> the <strong><u>LOCK AND UNLOCK</u> </strong>buttons on the First Remote for <u>approximately 15 seconds.</u> A chime will be heard indicating that the remote is programmed. 5.  To Program additional remotes repeat step 4. 6.   To exit programming mode turn the key off and remove key. &nbsp; Use this procedure for vehicles without drivers information center. 1.  Insert key into ignition and turn to the on position. 2.  Press the trip/odometer rest stem for 3seconds. (Remote Key Learning Active) will be displayed. 3.  <strong><u>Press</u></strong> <u>and <strong>Hold</strong></u> the <strong><u>LOCK AND UNLOCK</u></strong> buttons on the First Remote for <u>approximately 15 seconds.</u> A chime will be heard indicating that the remote is programmed. 4.  To Program additional remotes repeat step 4. 5.  To exit programming mode turn the key off and remove.