<strong>Programming Notes:</strong> A maximum of 5 key remote transmitters can be programmed. <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Gather all keys fitted with remote transmitters.</li> <li>Close all the doors, trunk/tailgate and hood.</li> <li>Switch ignition ON (without starting car).</li> <li>Proceed as follows: <ol> <li>Within 4 seconds: Press the LOCK or UNLOCK button of first remote transmitter.</li> <li>Within 4 seconds: Switch ignition OFF.</li> <li>Within 4 seconds: Switch ignition ON.</li> <li>Within 4 seconds: Switch ignition OFF.</li> </ol> </li> <li>Repeat procedure above twice. Locks should cycle when button is pushed. <ol> <li>Within 4 seconds of each other press the LOCK or UNLOCK button of each remaining remote to be programmed, allowing doors to lock and unlock once as each remote is programmed.</li> </ol> </li> <li>Switch ignition OFF, and remove key.</li> <li>Wait 10 seconds, and then check operation of all programmed remote transmitters.</li> </ol>