<strong>Programming Notes:</strong> A maximum of 4 key remote transmitters can be programmed <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Open driver’s door, close all other doors, and have key removed from ignition switch.</li> <li>Insert key into ignition switch, then remove it.</li> <li>Press LOCK and UNLOCK on the vehicle door lock control switch 5 times at 1 second intervals.</li> <li>Close and re-open driver's door.</li> <li>Press LOCK and UNLOCK on the vehicle door lock control switch 5 times at 1 second intervals.</li> <li>Insert key into ignition switch.</li> <li>Switch ignition ON and OFF once to program a key remote transmitter code whilst retaining the original codes or twice to program a key remote transmitter code whilst erasing the original codes, three times to check how many key remote transmitters are currently registered. Five times to erase all registered codes.</li> <li>Remove key from ignition switch:</li> </ol> <ul> <li style="text-align: left">System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of key remote transmitters registered.</li> </ul> <ol start="9"> <li>Press and release LOCK and UNLOCK buttons together.</li> <li>Press any key remote transmitter button for a minimum of 1 second.</li> <li>If required, repeat button procedure to program remaining key remote transmitters.</li> <li>Close driver's door or insert ignition key to exit programming mode.</li> </ol>