<strong>Programming Notes:</strong><strong> </strong> Gather all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. All existing and new remotes that you want to use on the vehicle must be programmed at this time. <strong>Step-by-Step Programming Instructions:</strong> <strong>Be sure to review all programming steps before proceeding</strong> <ol> <li>Enter the vehicle and close all doors.</li> <li>Open the Driver’s side door and leave it open.</li> <li>Within 20 seconds, insert the key into the Ignition and cycle the Ignition ON, OFF a total of 3 times followed by opening and closing the Driver’s side door OPEN, CLOSE a total of 3 times. The door locks will automatically cycle LOCK, UNLOCK to signal entry into Programming Mode.</li> <li>Press any button 2 times on the first remote to be programmed. The door locks will automatically cycle LOCK, UNLOCK to show successful programming of that remote.</li> <li>If needed, press any button 2 times on a second remote to be programmed. The door locks will automatically cycle LOCK, UNLOCK to indicate successful programming of that remote.</li> <li>Finish programming by again pressing any button 2 times on the last remote that was programmed. Once the door locks cycle, press any button 2 times on the same remote to EXIT Programming Mode.</li> <li>Test all remotes. Programming is now complete.</li> </ol>