<div class="page" title="Page 2"> <div class="layoutArea"> <div class="column"> <div class="layoutArea"> <div class="column"> &nbsp; </div> </div> <div class="layoutArea"> <div class="column"> Programming FOBs: NOTE: A maximum of 4 remote transmitters can be programmed (one at a time). Program all 4 memory positions to ensure lost or stolen remote transmitters will not work. <ul> <li>Press remote transmitter UNLOCK button to deactivate alarm (if fitted).</li> <li> Locate and record remote transmitter lD number from package or remote transmitter that will be programmed.</li> <li><em><strong>NOTE: the remote ID is also located on a sticker near the battery or battery conductor "in-side" the remote case. (Usually about 8 digits)</strong></em></li> </ul> </div> </div> <ul> <li> Open driver's door.</li> <li>Enter vehicle.</li> <li>Close driver's door.</li> <li>Within 15 seconds: Turn ignition key to ON position and back to LOCK position 10 times.</li> <li>An acoustic signal is emitted once to indicate programming mode activated. Another continuous acoustic signal will follow and interior lamp will flash until programming is complete.</li> </ul> NOTE: If an error occurs during programming, the acoustic signal will stop, the interior lamp will extinguish and the programming will need to be started again. <ul> <li> Within 45 seconds:</li> <li>Open driver's door.</li> <li>Close driver's door.</li> <li>An acoustic signal is emitted until the lD number is entered.</li> <li>Press the LOCK button on the door control panel <strong><em>(this is the driver's door electric switch)</em></strong> the same number of times as the first digit in the remote transmitter lD number.</li> <li>When the digit has been entered press the UNLOCK button on the door control panel.</li> <li>Repeat procedure with each digit counting from left to right.</li> <li>Repeat programming procedure for the entire lD number a second time.</li> <li>An acoustic signal is emitted once to indicate programming complete.</li> </ul> * Repeat ID number entering procedure for any additional remote transmitters being programmed. * Check operation of all programmed remote <div class="page" title="Page 2"> <div class="layoutArea"></div> </div> &nbsp; </div> </div> <div class="layoutArea"> <div class="column"></div> </div> <div class="layoutArea"> <div class="column"> &nbsp; </div> </div> </div>