<span style="text-decoration: underline"><strong>Programming Instructions for Transponder</strong></span> <strong>Be sure to review all programming steps before proceeding</strong> To add this key you must have an existing master key. 1. Open drivers door. All other doors closed but unlocked. 2. Insert the master key into the ignition and remove (without turning) 5 times leaving the key in the ignition on the 5th time. 3. Close and open the drivers side <a href="https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&amp;_nkw=door" target="_blank" rel="noopener noreferrer">door</a> 6 times leaving the <a href="https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&amp;_nkw=door" target="_blank" rel="noopener noreferrer">door</a> open on the sixth time. 4. Remove the master key.  The <a href="https://www.ebay.com/sch/eBay-Motors/6000/i.html?_from=R40&amp;_nkw=security" target="_blank" rel="noopener noreferrer">security</a> light should illuminate solid red on the dash and stay lit. This indicates the vehicle has entered programming mode. 5. Immediately insert the new unprogrammed key (do no turn) 6. Leave key in ignition for approx 60-80 seconds (security light will blink during this process). The security light will stop blinking. After the light stops blinking remove the new key. 7. Immediately insert the (old) master key and turn key to ON position then turn off and remove key.